UploadLanguage (EN)Support
BusinessMobileSocial MediaMarketingTechnologyArt & PhotosCareerDesignEducationPresentations & Public SpeakingGovernment & NonprofitHealthcareInternetLawLeadership & ManagementAutomotiveEngineeringSoftwareRecruiting & HRRetailSalesServicesScienceSmall Business & EntrepreneurshipFoodEnvironmentEconomy & FinanceData & AnalyticsInvestor RelationsSportsSpiritualNews & PoliticsTravelSelf ImprovementReal EstateEntertainment & HumorHealth & MedicineDevices & HardwareLifestyle
Upload
Sign in
mona verma, profile picture
Uploaded bymona verma
PPTX, PDF8,293 views

Health hazard of textile sfinishing workers

The document discusses health hazards in the textile finishing industry and their remedies. It notes that textile processing involves many subprocesses using various chemicals that pose health risks to workers. It categorizes hazards as chemical, physical, biological, psychological, and ergonomic. Specific chemical hazards mentioned include oxidizing agents, reducing agents, corrosives, irritants, and flammables used in processes like bleaching, dyeing, and finishing. Prolonged exposure can cause respiratory problems, burns, allergic reactions, and neurological effects. Solutions proposed include controlling chemicals, temperatures, noise levels, and improving workstation design and shift lengths.

Technology◦
Downloaded 288 times
1 / 42
2 / 42
Most read
3 / 42
Most read
4 / 42
5 / 42
6 / 42
7 / 42
8 / 42
9 / 42
10 / 42
11 / 42
12 / 42
13 / 42
14 / 42
15 / 42
16 / 42
17 / 42
18 / 42
19 / 42
20 / 42
Health Hazards of the Textile Finishing Industry and Their Remedial Measures Presented By: Mona Verma Ph.D. Research Scholar Deptt. of Textile and Apparel Designing, CCSHAU,HISAR mona.verma35057@gmail.com
Health hazards: a chemical that is capable of causing an acute reaction . A chronic effect or both. Health hazards can affect the whole body or a particular organ. Textile processing units consists of number of subunits engaged in different processes like pre-treatment dyeing, printing, finishing and number of other processes that are required to convert grey fabric into finished fabric. The workers in the industry are facing various health hazards due to harmful chemicals and abysmal working conditions. Finishing refers to the treatment of textile substrates to impart desirable properties (other than colouration), such as wash-and- wear finish, anti-shrink finish, water-repelling finish and flame- retarding finish.
Chemical Hazards- arising from liquids, solids, dusts, fumes, vapours and gases Physical Hazards- such as noise, vibration, unsatisfactory lighting, radiation and extreme temperatures Biological Hazards- such as bacteria, viruses, infectious waste and infestations Psychological Hazards- resulting from stress and strain Hazards associated with the non-application of Ergonomic Principles, for example badly designed machinery, mechanical devices and tools used by workers, improper seating and workstation design, or poorly designed work practices. Types of Health Hazards
High temperature The hot climate in the country poses special risks to the workers who have to work for extended hours. Some industries do not have adequate climate control resulting in heat stress, which causes fatigue and loss of productivity. Slips and Trips Slips and trips are common hazards in all industries. They are one of the most common causes of accidents and injuries in the workplaces. Slip hazards are exacerbated by lack of proper handling, lack of proper training and inadequate lighting. Sound: The continuous exposure to the sound will affects the workers in a negative manner in such a way that, it will cause headache, loss of attitude, presence of mind and hearing loss will occur. If the controlling equipments are not working properly this will cause improper temperature control in the production department. The roof of the production department is made of asbestos sheets this will absorb more heat this will cause to obtain more heat in the production department. Physiological Hazards
Psychological Workload Workers in textiles are required to work on a fast speed. One reason for this fast work may be that employees are paid on piece basis, so the more they produce more they earn. Psychological Health Hazards
Ergonomically health hazards Temperature: The temperature of the production department should be well controlled otherwise this will affect the working performance and attitude of the worker. Shift: If the facilities are not given correctly and the working time is too long mental stress will be more for the worker and this adversely affect the work and this result in poor quality products. The design of the work stations should be properly planned. Many of the muscular-skeletal problems faced by these workers are caused by uncomfortable posture and work arrangements. The work stations should suit the workers and make the job comfortable.
Chemical Health Hazards In terms of chemical hazards, wet processing is the most significant textile finishing operation, and the methods used vary greatly depending on end-products and applications, site-specific manufacturing practices and fibre types. Many chemicals used in textile finishing pose health and physical-chemical hazards. As some processes are operated at elevated temperatures, fire and explosion may occur. The textile finishing also uses many hazardous chemicals other than those for dyeing. These chemicals are divided and grouped into oxidising agents, reducing agents, corrosives, irritants and flammables.
Oxidizing agents used in textile finishing are mainly bleaching agents such as:  hydrogen peroxide, sodium hypochlorite and sodium di-chlorocyanurate. Violent reactions may be caused by uncontrollable decomposition of such chemicals. For example, if the chemical reaction during peroxide bleaching is not strictly controlled, a rapid evolution of oxygen can be caused by decomposition of hydrogen peroxide. The volume of oxygen thus produced may exceed the capacity of the relief devices causing the vessel to fail catastrophically. Mixing oxidizing agents with incompatible substances such as reducing agents will generate a lot of heat and toxic gases, or lead to explosion. Moreover, precautions must be taken to prevent occurrence of the following hazardous reactions between: (a) sodium hypochlorite and acid; (b) sodium peroxide and sodium hydrosulphite.
Reducing agents like sodium hydrosulphite are used in reducing bleach bath, in stripping (i.e. removal of a dye from a substrate) and in applying vat dyes. Other reducing agents are thiourea dioxide, sodium formaldehyde sulphoxylate (trade name “Formosul” or “Rongalite”), sodium bisulphite and sodium metabisulphite. Sodium bisulphite, when contaminated with acid, gives rise to hazardous fumes of sulphur dioxide. Sodium hydrosulphite, when contaminated with water, generates considerable amount of heat and may even ignite spontaneously.
The use of pressure equipment for high temperature operation can be found in: (a) scouring by kier – although the use of kier for scouring tends to be replaced by continuous preparation ranges, both pressure and open or atmospheric kiers are still found in use for the scouring and bleaching of fabrics. The main hazards include scalding by hot liquor or steam when a person is inside the kier, or the danger of falling into the kier. (b) Health hazard from flammable agents: Fire and explosion hazards may arise from the use of flammable substances, or oxidizing agents which can intensify a fire by supplying more oxygen. Flammable substances (e.g. petroleum spirit) are often used for preparation of emulsion thickening in pigment printing.
This incurs significant fire hazards to the workplace, particularly when the printed articles are subsequently baked at high temperature. Some aqueous organic acids, such as acetic acid, are flammable at high concentrations. The solvent base of resin coatings or adhesives, which is intended to be easily vaporized during the drying process, is usually flammable, e.g. white spirit. (c) Fine dust: Fine dust or loose fibres generated from textile processing operations like flocking may fly into the atmosphere or accumulate around machinery, ventilation ducts or light fittings. They will be easily ignited by electrical ignition sources such as overloaded circuit, damaged insulation and static discharge of electrical equipment. Fine dusts produced from processed and treated nylon fibres may become explosive.
In textile finishing, strong acids and alkalis, such as sulphuric acid and caustic soda, are commonly used. These are very corrosive chemicals that can cause serious burns and react dangerously with other chemicals. The dyeing and after-finishing processes involve many chemicals that are irritating to eyes, skin and respiratory tract. These include formaldehyde-based resins, ammonia, dilute acetic acid, aqueous ammonia, some shrink-resist chemicals and optical whiteners, soda ash, various bleaches and acrylate (for preparation of screens).
Process Chemicals used Health hazards Singeing Small amounts of exhaust gases, negligable impact _______ Desizing - Enzymes or H2SO4 for starch, detergents and alkali for PVA and CMC Bloating and Diarrhoea. Irritant to eyes and skin Scouring NaOH,Na2CO3, surfactants, chlorinated solvents Non-ionic detergents may cause bloating and Diarrhoea, Irritant to eyes and skin. Bleaching -Hypochlorite - Hydrogen - peroxide - Acetic acid Chlorine gas released, causing severe irritation of respiratory tract and eyes tract and eyes Toxic gases Mercerization NaOH, surfactants, acid, liquid ammonium _______ Health Hazards Associated With Chemicals Used In Textile Industries
Process Chemicals used Health hazards Chemical finishing: - Anti- crease - Flame proofing - Softening - CH2O - Phosphorus - Softeners - Fluorinated chemicals - Catalyst - Formaldehyde - Ammonia Intense irritation of eyes and nose and headaches. Causing vomiting, and coughing. High concentration can cause respiratory arrest. Water- proofing - Paraffin - Aluminum salts - Zircon salts - Silicone - fluorocarbon resins - Toluene may be used in solvent coating operations can cause, headaches, confusion weakness, and memory loss, and affects function of kidney and liver , formation of ozone which causes asthma
Process Chemicals used Health hazards Anti-staic finishing Surface- active substances Possibly skin allergies Anti-felt finish (for wool) - Chlorine - Polyamide - Epich chlorohydrin resin Chlorine vapour is hazardous, and can cause respiration problems Moth and beetle protection (for wool) - Chlorinated sulphonamide derivatives ,Biphenyl ether - Urea derivatives ,Pyrethroids Pyrethroids may cause neuro toxic effects Weighting - Stannic chloride ,Sodium phosphate ,Water glass VOCs, combustion exhausts have effect on skin Hydrophilising - Polyamide , Polyacrylic - Silicon VOCs, possibly skin allergies
Process Chemicals used Health hazards Delustering -Phenol ,Turpentine , Pine oil - Glauber salt,Barium chloride -Resins containing formaldehyde - Alkali sulphide - Allergy inducing - In some cases carcinogenic substances Abrasion resistant finish - Silica gel - Plastic resins VOCs, causing irritation of respiratory system. Skin allergies Sanforizing - Urea formaldehyde - Melamine formaldehyde - Skin allergies - Carcinogenic properties
Process Chemicals used Health hazards Cutting fabrics No chemicals Particulates Little effect on respiratory system Fusing the interlining to fabric pieces Fumes of interlining adhesive resin, and fabric finish Slight effect of adhesive fumes on respiratory system (VOCs) Sewing Particulates Negligable effect on respiratory system Ironing Fumes from fabric Negligible effect on respiratory system Health Hazards In Garment Industry
Routes of entry of chemicals into the human body
Organs and tissues that may be affected by particular toxic textile chemical
Health problems from pollution
Risk Assessment
The risk of absorption of a solvent into the body depends on: particular chemical, its concentration, frequency, duration and mode of exposure. Short term health effects range from loss of concentration, mild headaches and nausea, to more severe headaches, vomiting or even unconsciousness. In the long term, kidney and liver damage may result from such absorption Risk assessment on textile finishing requires knowledge of the properties of chemicals and the reactions involved in the concerned chemical processes.
Physical form of the chemicals : The physical forms of the chemicals used in textile finishing have pronounced effects on the hazards of the chemicals. For those in the state of gases, vapours, fumes, aerosols, airborne particulates, the risk of entry into the human body as well as the risk of fire and explosion is increased. It should be noted that aerosol, particulate and powder forms of combustible materials can form explosive/flammable mixtures with oxidizing agents, including air.
Chemical changes If chemical change is involved, the chemical reaction and the products should be studied. The hazards associated with the chemical reaction as well as hazardous properties of the reactants and products in textile finishing processes should be identified. Special attention should be paid to any possible side reactions and by-products. Temperature and pressure changes Many physical and chemical changes may evolve heat, causing a rise in temperature during the finishing processes. They may result in: (a) formation of hazardous gases, vapours or fumes; (b) pressure increase in the container causing explosion; (c) rapid bubbling causing splashing of hot hazardous fluids; or (d) increase in reaction rate generating even more heat.
Scale of the process The scale of the process determines the amount of hazardous chemicals involved. Change in the scale affects the heating effect of the operation as well as heat dissipation and pressure change in the system. Extent of exposure: The extent of exposure to hazardous chemicals is affected by: (a) frequency, duration and mode of exposure; (b) rate of generation and concentration of the hazardous chemicals in the atmosphere; and (c) effectiveness of control and protective measures in minimizing the exposure.
Working environment The working environment ranging from the containers holding the chemicals to the general conditions of the workplace is an important aspect in the risk assessment of textile finishing. The following factors should be considered: (a) size and shape of the container where chemical or physical changes take place, especially the headspace in the container and passage for release of pressure; if the container cannot withstand or release the increase in pressure, explosion may occur; (b) presence of nearby ignition source, if explosive/flammable mixtures are encountered; (c) whether processes undertaken or chemicals stored or used are sensitive to air, moisture, temperature or light; and (d) ventilation of the environment.
Safety Measures
Overall strategy on establishing safety measures Elimination of hazardous material: The primary consideration is to adopt appropriate preventive measures to directly control the hazards at source, such as by elimination or substitution. For instance, certain azo dyes likely to form carcinogenic substances during dyeing process should be replaced by non-hazardous or less hazardous ones. These carcinogenic substances may also be regulated by the Factories and Industrial Undertakings (Carcinogenic Substances) Regulations. Process and equipment modification: Process and equipment modification can eliminate or minimize the risks arising from the hazardous chemicals and/or processes. Modifications may include improved process control systems or changes in chemical application methods
Ex. Low bath-ratio dyeing can save energy and reduce chemicals used, because energy and chemicals used depend on bath volume. Jet dyeing and package dyeing are commonly used for low bath-ratio dyeing. It is preferable to incorporate safety considerations during design stage of a process or equipment, as this would save additional expenses and often reduce practical difficulty in subsequent safety adjustments. Ventilation: Ventilation is an effective engineering means to prevent accumulation of vapours of explosive/flammable mixtures or inhalation of toxic gases or vapours in the workplace. However, attention must be paid to the relevant environmental protection requirements in the discharge of exhaust air to prevent contamination of the outside environment.
All safety measures should be documented in the standard operating procedures of the finishing process, and should be made known to all workers concerned. The effectiveness of the safety measures should be constantly monitored. If changes are made to the standard operating procedure, a fresh risk assessment should be conducted and the safety measures should be reviewed and appropriately amended. In keeping with the concept of continuous improvement, the safety measures should be constantly reviewed to accommodate new development in safety technology. Safety measures can be realised by engineering and/or administrative means. Engineering measures such as ventilation, equipment and process modification, etc. can eliminate or lower the risk at source while administrative measures reduce exposure of workers by implementation of safe work practices or procedures, and scheduling of breaks or rotation shifts. Standard Operating Procedures
Personal Protective Equipment (PPE) The primary objective of using PPE is to protect workers against the risks of hazardous chemicals entering the body through inhalation or skin contact. PPE should only supplement and not replace the preventive measures. Appropriate PPE should be selected with regard to the hazards, physical nature and the routes of entry of the chemicals into the human body.
Protective Clothing: Protective clothing provides skin protection against chemical splashes, vapour and particulate exposures and other physical hazards. In textile finishing, suitable protective clothing should always be worn when dispensing and handling hazardous chemicals or dusty materials such as dyestuffs. Hand and foot protection : Impervious gloves protect the hands of the worker from contacting hazardous chemicals. If workers have to work on wet floors, they should also wear protective footwear, preferably of slip-resistant type. Eye protection: Where there is a risk of eye injury through splashing, suitable eye protectors or face shields should be worn. Safety spectacles can be fitted with prescription lenses if required, while safety goggles that completely enclose the eyes provides superior eye protection. If protection to the face, mouth and nose is required in addition to the eyes, face shield should be used.
Respiratory protective equipment (RPE): Respiratory protective equipment (RPE) protects against exposure to dusts, gases, fumes and vapours, but exposure duration should be kept short. For fire and other major emergencies where asphyxiation or inhalation of toxic gases is possible, RPE should comprise full breathing apparatus. Monitoring and health surveillance Monitoring is a means to ensure the effectiveness of the control measures. In textile finishing, environmental monitoring generally involves measuring the levels of the contaminants in the air at strategic locations in the workplace or at the breathing zone of the workers concerned. The monitoring can be continuous or in a form that requires regular sampling and analysis using equipment that includes sensor with alarm device, direct-reading instrument, static sampler and personal sampler.
Incompatible materials like soda ash and acetic acid should not be stored close to each other. Chemicals were mixed and poured in one area. Most of the chemicals were used in plastic buckets. It was very difficult to identify the contents of the buckets. In order to avoid risks to workers all the containers whether small or large should be labeled preferably in hindi or english with danger signs and emergency actions prominently displayed. Precautionary notices in simple language on the health hazards involved in various operations should be displayed in the workplaces. Remedial Measure : Precaution while handling chemicals
Where work is too fast and hard, it is suggested that workers are given some short interval breaks for better performance and less error rate. Focus on providing proper job, work and safety training to all the workers for a better and full potential utilization and less errors and accidents on job. Workers should be provided separate work clothes, which should not be taken to home and washed frequently. Facilities for washing the hands with soap and running cold and hot or warm water should be installed at strategic places so that the workers can frequently wash their hands and skins. Separate accommodation for outdoor clothes and work clothes should be provided.
Wheeled trolleys should be used for transport and large dye drums should be mounted on castors. In storing chemicals, particular care should be taken to avoid confusion where chemical names look very much alike, for example, sodium chlorate and sodium chlorite. Separate dispensing scoops or handling containers should be used to prevent cross-contamination of incompatible chemicals. Safety showers should be provided in places where there is a risk of substantial contact with corrosives.
There is always a risk of falls of containers from overhead pallets during transportation. The workers in this area should use safety helmets. Risk of splashes and spills is always there. There should be an emergency shower nearby. Workers should be trained to wash off the spills if any to avoid fire and respiratory hazards . The garments are pressed using steam. The area was very hot although fans were working in the area. Frequent rest breaks for the workers and availability for nearby cold water is advised.
Periodic medical examination of workers is desirable especially to discover cases of health impairment. Specially the audiometry of workers exposed to high noise and the pulmonary function testing should be carried out at regular intervals to monitor and prevent and progressive lung disorders. First-aid boxes should be provided and adequately maintained in the workshops and adult workers should be trained to use the facilities for even slight abrasions. Some workers were using masks, which were found to be inadequate against the exposures like acetic acid. If the masks are to be sued, then proper masks should be provided suitable against the chemicals used in the area. All the workers who mix and transfer the chemicals must be made to wear impermeable apron, splash proof goggles/spectacles and safety boots.
Smoke detectors should also be installed in this area in order to provide an alarm in case of a fire as most of the items stored in this area are combustible and may catch fire due to short- circuiting or other causes. Conclusion: Safety and health hazards measure play an important role in any industry. It is essential that the workers be aware of the various occupational hazards in the industry. At the same time ,it is necessary that the management should take necessary steps to protect their worker from potential hazardous situations.
42